Pixie Earrings

 These earrings are named after my lovely kitty-cat and beading companion, Pixie. I came up with the design while I was trying to work out new ways to use up some of the two-hole beads in my stash.  As they’re component based, it’s easy to make smaller earrings using either just the rivoli or chaton elements, or bead a bunch of the elements and join them together to make a bracelet or necklace. 

I chose a very smoky, sultry colour scheme for my earrings, but these would look beautiful in pearl tones for a bride or pastel colours for a spring look, or even black and silver to complement a little black dress! If you love this colour scheme, I've listed the bead colours I used at the end.

What you'll need to make this:

A. Size 11 seed beads (2g)
B. 40 half tila beads
C. Size 15 seed beads (3g) (to match A)
D. Size 15 seed beads (3g)
E. 20 quarter tila beads

2 14mm rivolis
2 ss39 chatons (8mm)
ear wires

Anything else? 

Beading thread (I use fireline 0.10mm)
Beading needles (I use Miyuki brand)
Bead mat
Scissors or thread zap
Pliers for opening and closing ear wires

1.     Pick up 1(A),1(B) 10 times and tie in a circle with a double knot. Thread through a few beads until you are exiting a (B), and then thread through the top hole of the (B). 

2.     Pick up 1(B) and thread through the top hole of the next (B) in the circle from step 1. Repeat around the circle, go through the first (B) you added in this step and then through the top hole.

 

3.     Pick up 1(A) and go through the top hole of the next (B) in the circle from step 2. Repeat this around the circle but do not pull tightly yet. Go through the first (A) added in this step, keeping the tension very loose, then add the 14mm Rivoli with the front facing up. Pull your thread tight and reinforce the thread path. Go back through the outer hole of one of the (B) beads.

 

4.     Pick up 4(D), go through the corresponding hole on the next (B) on the front side of the bezel. Repeat a further 9 times all the way around the bezel. Step up by going up the first 2(D) added in this step.

 

5.     Pick up 1(D), go through 2(D),1(B),2(D). Repeat this around the bezel. Adding the 5th bead to the picot in this way makes them more pointy.
Step up by exiting from a (B) bead with your thread coming out towards the front of the bezel.

 

6.     Pick up 3(C). Go though the next (B). Repeat this around the bezel. Step up by exiting from the first (C) added in this step. To make these picots more pointy, we will: skip the middle (C), go through the third (C) and the next (B). Repeat around the bezel; go through 1(C), skip 1(C), go though 1(C),1(B). Thread through to the outer hole of a (B) on the back of the bezel.

 

7.     To make the loop for the earwire: Pick up 7(C), go though the next (B). To reinforce this loop, go down through the lower hole in the (B),1(A),1(B), up through the top hole in the (B) and through the 7(C) again.  Weave in your thread ends and tie off.

 

8.     To make the chaton element: Pick up 10(E) and tie in a circle with a double knot. Go through a few of the (E) beads again, the up to the top hole of the (E) your thread is exiting.

 

9.     Pick up 1(A), go though the next (E) in the ring. Repeat this around the ring and step up by exiting from the first (A) you added in this step.

 

10.  Pick up 3(D), go back though the (A) your  thread was exiting, and thread through 1(E), 1(A).

 

11.  Pick up 2(D), thread down through the first (D) added in step 11, the (A) your thread started from in this step and 1(E),1(A) (this is a modified Right Angle Weave). Repeat this 7 more times (total of 8 times).

 

12.  With your thread exiting the last (A), thread up through the 3^rd (D) added in step 11, pick up 1(D), and thread down through the 1^st (D) on the opposite side. Then thread back through 1(A), 2(D). Before pulling everything tight, pop the chaton into the bezel. This will not hold the chaton in place yet.

 

13.  Pick up 1(C), go through 1(D). Repeat all the way around the bezel. Getting the chaton to sit square in the bezel can be a little tricky, but with a little patience and manipulation, you will get there. Once it’s how you’d like it, pull your thread tight, then reinforce this thread path several times.  Step up to exit from an (A) bead.

 

14.  Pick up 4(D), go through 1(A). Repeat a further 9 times all the way around the bezel. Step up by going up the first 2(D) added in this step.

 

15.  Pick up 1(D), go through 2(D),1(A),2(D). Repeat this around the bezel. Adding the 5^th bead to the picot in this way makes them more pointy.
Step up by exiting from a (A) bead with your thread coming out towards the front of the bezel.

 

16.  Pick up 3(C), go though the next (A). Repeat this around the bezel. There is no need to repeat step 7 on this bezel as it is smaller and the picots are naturally very pointy.

 

17.  Thread through your work so that your thread exits the middle (3^rd) (D) on one of the outer picots. Pick up 2(D), thread through 3(D) on the bottom of larger, rivoli bezel.  Thread through the outer hole on the (B), (A), and the outer hole on the next (B). Thread down though 3(D), pick up 2(D) and down through 3(D) on the corresponding picot of the chaton bezel. Reinforce this thread path, then weave in and trim the thread ends.

 

18.  Add the earwire to the loop at the top and repeat steps 1-18 to make the second earring.

I'd love to see what you make using this design. Please feel free to tag me on Instagram or Facebook @BeadsbyBecs or use the hashtag #beadsbybecs

A. size 11 seed beads - Miyuki California black violet

B. half tila beads - Miyuki dark bronze

C. size 15 seed beads - Miyuki California black violet

D. size 15 seed beads - Miyuki matte metallic khaki iris
E quarter tila beads - Miyuki dark bronze

14mm rivolis - Preciosa venus

ss39 chatons - Preciosa lava 

Welcome back!

It has been a terribly long time since I updated my blog, so sorry for neglecting you all. There have been a lot of changes in my life in the last few years but now I'm in a position to dedicate more time to my passion for beading, and my love for sharing that with you all.

I have been creating during this time, I've designed so many lovely things, and I'm very happy to say that I will be sharing lots these tutorials here on my blog. You have necklaces, ropes, earrings, bracelets, and even some 3D objects to look forward to.

This spring time necklace is one of the designs I'll be sharing first, even though the daffodils are just about past  their best, it doesn't mean you have to stop feeling the spring vibe.

This is one of the most sparke-tastic pieces I've ever designed, I think. It was made using Swarovski crystals, and I loved how the chatons looked like little inkwells of colour in amongst all of the clear crystal. I'm sure it will look equally amazing with Preciosa or Aurora chatons and crystals. This is the Scintilla necklace,

The last little sneak peek I'm going to share with you is a pair of earrings that I designed in my 2021 earring marathon. I did manage to complete the challenge and bead a pair of earrings for every week of the year, which was an epic achievement. This pair I was especially pleased with, and I named them after my little cat, Pixie!

And because she's adorable, I couldn't leave Pixie herself out!

I look forward to Seeing you all really soon and sharing the pattern for my Daffodil necklace with you.

January Retrospective

 I must say, I've beaded more in January than I have in a very long time, and I've really enjoyed it. Although there were only 5 weeks in January (I've been beading a pair of earrings for every weekend, rather than every week)... I've actually made 7 pairs of earrings! If you read my new years resolution blog, you'll be familiar with the first two pairs, but I wanted to keep a record of each month's makes together, so I've included them here again. 

Tassels and Superduos - my own design. 

Scintilla Earrings - my own design. 

Keep your eye out for Bead & Jewellery Magazine issue 107 to see a tutorial for how to make these.

RAW Pearl Bezel design by Jean Power from her book Rivoli Beadwork. 
I initially made these as I'd seen a friend make them with sapphire rivolis and cream pearls, and they were beautiful, but very traditional looking - I wanted to see how different they would look with dark pearls and a lighter rivoli. The long kidney wire earring findings added to the different look. I really love them. 

In fact, I loved them so much.... I beaded a second pair! 

These are based on the Bicone Snowflake design from Jean Power's book Rivoli Beadwork, although I have used chatons - the 14mm chatons are lovely, etched Chinese crystal chatons which have a really unusual look.

I am in love with these Little Lantern earrings from Sabine Lippert's book Beaded Fantasies.   I made a pair years ago and they have been worn a LOT, so making a second pair seemed like a good idea. They were quick to make up and used some really interesting construction techniques, as Sabine's beadwork always does. 

This last pair for January are my design. A simple loop of CRAW with a crystal dangle in the middle. I must say, if nothing else, I'm very impressed with my wire wrapped loops on these earrings. They're neat and they match - that's quite a feat for me! 

I hope you've enjoyed joining me on my earring journey in January. If you have any questions about the designs I used, or have any suggestions for future months, please drop me a message in the comments. 

I've also noticed that my colour schemes seem to fall into the pink or blue/grey box, so if you have suggestions for colours you think I should try, just let me know. 

2021 New Years Resolutions

 The beginning of a new year is the time to make new starts and new resolutions.  I'm not normally one for new years celebrations or resolutions, but this year I've been inspired. 

I was asked by the lovely Clair Rigby if I would like to join her in her #earringchallenge2021 to make a pair of earrings every week in 2021. This is a no-pressure challenge, and I'm aware that I'm not going to be able to achieve this every week - but it is at least, an incentive to bead each week. It's also giving me the opportunity to do something that I've been thinking about for quite some time, which is to document my creative endeavours in a slightly more structured way. At the moment, if I'm lucky, there will be a picture of something I've made on my phone... but no information on materials, who the designer was (if I used a pattern), what inspired me (if it's my design), what materials I used etc. So I'd like to use this challenge and my blog to gather this information. I'm aiming to blog once a month and post my weekly makes on Instagram. If you don't already follow my on Instagram, you can find me @beadsbybecs

To start the year off, I've got a couple of earring makes I have to confess, the super-sparkly pair I started in 2020, but I attached the ear wires in 2021 (that counts, right!?). 

These are made with some lovely white opal Swarovski chatons and the bezels are made with 3mm and 4mm bicones. This is my Scintilla pattern (it'll be released later this year). 

If you can get more glam than all this sparkle, then this second pair of earrings fit that bill. They're much more dressy, and they continue along my little self-challenge of making bezels with different beads to just regular seed beads. 

These are bezelled using superduos - superduets actually - they're navy on one side and cream on the other. The rivolis are Chinese crystal rather than Swarovski, but still incredibly pretty. I made the tassels using a Clover tassel maker and three different colours of thread - navy, hot pink and a silver-grey. Also, I tend to use wire guardians at the top to add the ear wires, they're very hard-wearing and give a professional looking finish. 

I'm quite happy with these two pairs of earrings as a start to the year and to the challenge - I've started as I mean to go on. 

I think six years ago I set a resolution to learn to knit, and I learnt to knit and fell so passionately in love with it that I ended up getting repetitive strain injury from knitting, and now I can't do it without considerable pain, but the point I'm getting at, is that I know I can stick to a resolution, and I know I can fall in love with a creative idea - not necessarily *just* making earrings, because I know that'll probably be a little too restrictive, but I want to fall in love with making again, and the process of relaxing with my beads, instead of sitting with my phone in my hand, endlessly scrolling and watching the doom and gloom go by.